Flowing Bowls Self Contained Water Feature
A cascading three-bowl water feature in natural stone-effect concrete with built-in LED lighting
Key Features
- 500mm Tall Cascading Water Feature.
- Glassfibre Reinforced Concrete Construction.
- Natural Quarried Stone Effect Finish.
- Self-Contained Design.
- Built-In LED Lighting.
- Pump Included with 10m Cable.
- Weather Resistant for Year-Round Use.
- Suitable for Indoor and Outdoor Placement.
The Flowing Bowls Water Feature creates a gentle cascading display as water spills through three textured bowls. Standing 500mm tall, it sits perfectly on a patio table, raised planter ledge, or directly on stone paving.
Each bowl is cast from glassfibre reinforced concrete with a finish that closely mimics quarried stone. The material is lighter than solid stone but tough enough to withstand frost, rain, and UV exposure throughout the year. You get the look of carved stone without the weight.
Setup takes minutes. Fill the lowest bowl with water, plug the pump into a weatherproof outdoor socket, and switch on. Water circulates from the base up through each bowl and cascades back down. The 10-metre cable gives you plenty of reach from the nearest power point.
A single built-in LED lights the water flow from within. After dark, the illuminated cascade becomes a striking focal point on any patio or courtyard. The low-voltage pump keeps running costs minimal.
At 740mm wide and 500mm deep, the Flowing Bowls fits comfortably into smaller garden spaces. The self-contained reservoir means no plumbing connections and no ongoing water supply. Just top up the level occasionally in warm weather to replace what evaporates.
- 500mm Tall Cascading Water Feature.
- Glassfibre Reinforced Concrete Construction.
- Natural Quarried Stone Effect Finish.
- Self-Contained Design.
- Built-In LED Lighting.
- Pump Included with 10m Cable.
- Weather Resistant for Year-Round Use.
- Suitable for Indoor and Outdoor Placement.






